The CR7 (basic) is a portable spectrophotometer developed by 3nh using its own core technology of spectroscopy. It uses a built-in silicon photodiode array (dual-row 24 groups) sensor, an imported white board, and the repeatability ΔE*ab can be easily controlled within 0.1. CR7's powerful performance configuration and excellent inter-instrument error make color measurement more professional, while also ensuring the consistency of measurement data of multiple devices.
1. Adopt full-band balanced LED light source
The full-band balanced LED light source ensures sufficient spectral distribution in the visible light range, avoids the lack of spectrum of white LEDs in a specific band, and ensures the measurement speed of the instrument and the accuracy of the measurement results.
2. Silicon photodiode array (double 24 array) sensor
The dual-24 array sensor with larger area has strong light but not saturate, higher sensitivity of low light and wider spectral response range, which ensures the measurement speed, accuracy, stability and consistency of the instrument.Mastering the core technology and fully compatible with international standards.
3. Grating Spectrophotometric technology
Using grating spectrophotometric technology, it has higher resolution and makes color measurement more accurate.
4. Place the base safely to ensure that the whiteboard is not dirty. Professional whiteboard, a promise that will never change color forever.
5. Fast charging
Special fast charging method, low-voltage reminder to charge or use of off-hours to charge, to ensure the capacity and life of the battery (note: frequent repeated charging of the battery is more harmful).
6. Single measuring aperture can accurately meet the needs of sample measurement
Spectrocolorreader CR7 (basic) is equipped with a Ø8mm platform aperture to meet your sample measurement needs.
7. Excellent inter- instrument error and repeatability to ensure the consistency of measurement data of multiple equipment
8. Excellent inter- instrument error and repeatability to ensure the consistency of measurement data of multiple equipment.
Spectrocolorreader CR7 Technical Specs
||D/8 (diffuse illumination, 8° direction reception)
|Comply with standard CIE No.15,GB/T 3978,GB 2893,GB/T 18833,ISO7724-1,ASTM E1164,DIN5033 Teil7
||Single measurement aperture for accurate color difference control in plastic and electronic, paint and ink, textile and garment printing and dyeing, printing, ceramics and other industries
|Integrating sphere size
||Combined full-spectrum LED light source
||Silicon photodiode arrays (dual row 24 groups)
|Reflectivity: can test the reflectance at a specific wavelength specified by the user (default 550nm)
|Color difference formula
|Other colorimetric indexs
||Reflectivity(at 1 specific wavelengths specified by the user)chromaticity value, color difference value/graph, pass/fail result, color simulation, color offset
||Chromaticity value: MAV/SCI, ΔE*ab within 0.1 (When a white calibration plate is measured 30 times at 5 second intervals after white calibration)
||MAV/SCI, within ΔE*ab 0.4(Average for 12 BCRA Series II color tiles)
||Single measurement, average measurement (2~99 times)
||Lithium battery, 6000 times in 8 hours
|Illuminant life span
||5 years, more than 3 million times measurements
||TFT true color 3.5inch, capacitive touch screen
||USB is for charging only, does not support quality control software
||500 standard samples, 1,0000 samples
||Simplified Chinese, English, Traditional Chinese
|Operating temperature range
||0~40℃, 0~85%RH (no condensation), altitude< 2000m
|Storage temperature range
||-20~50℃, 0~85%RH (no condensation)
||Power adapter, data cable, manual, black and white calibration box, protective cover, wrist strap, single aperture: Ø8mm platform aperture
||USB micro printer, powder test box,holder base
||Technical parameters are for reference only, subject to the actual sales of products
3nh Customer Centre
Contact: Jenny Huang (sales manager)
Office Address : F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st Road, Shiyan, Baoan District, Shenzhen, China.
Factory Address : 4/F, Building 8, Nangang Second Industry Zone, No. 1026, Songbai Road, Xili, Nanshan Dist., Shenzhen, Guangdong,
Fax : 86-755-2719-0609
Skype : huang.zhen9
WeChat : 86-18165740359
Email : email@example.com